Official distributor in Russia and CIS countries

< >
Navigation through applications
Higher-level applications
Hydraulic Testing
ID: i

Hydraulic testing of pressure vessels, products, pipelines, and systems. Static pressure testing, strength and integrity testing, cyclic testing.

Current application
Endurance Hydraulic Testing
ID: 204

Endurance Hydraulic Testing

Long-term endurance testing of equipment under pressure to evaluate service life and reliability. Repeated loading cycles in conditions close to real operation. For critical units and systems.

Task clarification
High pressure vessel tests
ID: 240 i

High pressure vessel hydroproof and tightness testing, burst tests, cyclogram tests

Testing of equipment casings
ID: 241 i

Hydroproof testing of the equipment working at high pressures: pumps, compressors, hydraulic sylinders etc.

High pressure hoses, tubes and tube assemblies test
ID: 242 i

Hydroproof, tightness, cyclic, burst testing of high pressure hoses, tubes, tube assemblies

High pressure valves and fittings testing
ID: 291 i

Hydroproof valve body tests, leak tight and bubble tight gland pack and seal tests

Similar applications
Hydraulic Pressure Testing
ID: 44 i

Basic hydraulic pressure testing — tightness verification of vessels, pipelines, and equipment under pressure. Leak detection, visual inspection. Basic operation during installation, repair, and maintenance.

Hydrostatic Testing
ID: 45 i

Hydrostatic (static) testing under constant pressure: tightness testing, strength verification, safety valve calibration, instrument calibration, volumetric expansion testing.

Cyclic Pressure Testing
ID: 46 i

Cyclic (impulse) testing of high-pressure hoses, cylinders, brake tubes and hoses. Repeated pressure loading at specified frequency and amplitude. Fatigue strength, service life, and tightness after cycling verification.

Hydraulic Burst Testing
ID: 47 i

Testing of materials, pipes, hoses, vessels, and cylinders to ultimate pressure until failure. Smooth or stepped pressure increase to determine safety factor, yield strength, and failure characteristics of specimens.

Tightness Control and Leak Detection
ID: 48 i

Tightness control and leak detection in pipelines, equipment, and vessels. Liquid supply under test pressure, visual and instrumental inspection for leaks. Applications during installation, repair, and periodic system testing.

Programmed Pressure Testing
ID: 49 i

Stepped or programmed pressure loading of equipment according to a specified time-pressure profile. Simulation of real operating conditions, verification of tightness and strength under variable loads for vessels, pipelines, and valves.

Hydraulic Volume Expansion Testing
ID: 206 i

Hydraulic testing for volume expansion and subsequent compression. Checking elastic and plastic deformations of bodies and vessels under pressure. Assessing residual expansion after pressure release to determine strength.

Field Hydraulic Testing
ID: 205 i

Mobile hydraulic testing of equipment directly at the operation site. Pressure testing of pipelines, downhole equipment, and systems without disassembly. Using portable high-pressure pump units.

Testing of Repaired Units and Assemblies
ID: 50 i

Hydraulic testing of repaired units, assemblies, pumps, and hydraulic valves. Verification of tightness, working pressure, and functionality before commissioning. Quality assurance of restored equipment.

Endurance Hydraulic Testing
ID: 204 i

Long-term endurance testing of equipment under pressure to evaluate service life and reliability. Repeated loading cycles in conditions close to real operation. For critical units and systems.

Products for the application

High Pressure Hydraulic Test Pumps

HP pumps for hydraulic testing of pressure equipment and systems


More ...

Open catalog

Cyclic Test Benches

Cyclic test benches for high pressure high volume cyclic testing


More ...

Open catalog

Automated pressure test stands

Pressure test stands with partial or complete automation


More ...

Open catalog

Pressure Test Systems with Automated Readout

Pressure Test Systems with manual operation and automated system of test results registration and management


More ...

Open catalog

Combined Test Stands

For combined hydraulic, pneumatic and gas test procedures


More ...

Open catalog

Equipment to solve the task: Endurance Hydraulic Testing

HII pump model 7L-DD-200
ID: 104 i

Ultra-high pressure piston pump with dual pneumatic actuator for cyclic testing, endurance testing of tanks, receivers, cylinders, hoses, tubing

HII super pressure pump model 5L-SD-410
ID: 85 i

Single acting double air driven super pressure pump 5L-SD-410 for pressure range 150 ... 400 MPa / 1500 ... 4000 bar

Panel for testing of shut-off and control valves
ID: 37 i

Universal panel for hydraulic and pneumatic testing of shut-off and control valves

Bench for hydraulic testing of special vessels
ID: 41 i

Combined test bench according to individual specifications

Needle valve NR20MF6B high pressure angle type 20000 PSI 1380 bar 3/8
ID: 197 i

High pressure needle valve angle type pressure class 20000 PSI 1380 bar connections 3/8" MP

AVS high pressure valves air operated air-to-open ATO
ID: 315 i

AVS series high pressure valves air operated with air drive type Air-To-Open ATO

Tube-Female micron filter FL20MT4MF4
ID: 304 i

Tube-Female micron filter FL20MT4MF4 Medium Pressure 20000 PSI 1380 bar 1/4" MP

In-line filter FL15FN8
ID: 276 i

In-line filter FL15FN8 15000 PSI 1034 bar 1/2" NPT type Female-Female

Приглашаем технических писателей Ваш опыт применения нашего оборудования - истинная ценность для нас. Вам есть о чем рассказать? Готовы помочь нам сделать сайт лучше за вознаграждение?