Micro-fog air humidification unit

Maintaining the specified humidity in server rooms, data centers, mining farms, as well as for humidifying the air in production processes

Installation of air humidification with micro fog KGS-STEAM-M1-500-60- M

KGS-STEAM fogging systems model range

Installation of KGS-STEAM-M1-500-60- M is optimal for maintaining a given air humidity in data centers, mining farms, Tier-I to Tier-IV servers according to the Uptime Institute classification

It can also be used to humidify the air in various production processes.

Micro fog of 500 bar pressure class has the highest dispersion, lightness, dissolves quickly in the air without sediment. A highly efficient humidification method with simultaneous cooling of industrial premises, data centers and server rooms.

Minimum configuration of the micro-fog humidification unit KGS-STEAM-M1-500-60- M

Hydraulic pump with pneumatic drive, model 5L-SS-60
Low pressure line:
- Water connection fitting G1/2"
- Mechanical filter at the input of 10 µm
High pressure line:
- Mechanical pressure gauge OR digital pressure gauge OR discharge pressure converter for monitoring the supply pressure of injectors
- Plug for residual pressure relief and system pumping
- High pressure nozzle for feeding misting nozzles
- 1/4" high pressure tubes and fittings – pressure class not less than 600 bar
Pneumatic pump drive control line:
- Air source connection fitting
- Mechanical dust filter/oil/dehumidifier with automatic condensate discharge
- Solenoid valve (220V/12V/24V) for automatic control OR manual pump control valve
- Mechanical pressure gauge OR digital pressure gauge OR pressure converter OR pressure indicator for monitoring pressure in the pneumatic network
Housing:
- Welded semi-open/closed stainless steel frame. steel (standard)/aluminum (optional) with main control panel and side panels.
- Optional: Intelligent control panel design.

Characteristics
Pump Model	5L-SS-60
Number of pumps in the unit	1
Drive Type	pneumatic
Type of hydraulic part	single plunger
Operating pressure	60 – 500 bar
Pump performance:
Constant mode of operation (24x7)	0 – 0.9 l/min
Cyclic operation mode	up to 1.8 l/min
Number of simultaneously fed nozzles 0.15 mm:
Constant mode of operation (24x7)	1 – 6 pcs
Short-term cyclic operation	up to 12 pcs
The rate of humidification of indoor air:
Constant mode of operation (24x7)	0 – 2000 m³×%/min
Short-term cyclic operation	up to 4000 m³×%/min
Recommended room volume:
Fine irrigation, artificial fog in greenhouses	up to 500 m³
Humidification and cooling of objects with intensive ventilation	up to 1000 m³
Humidification and cooling of objects with moderate ventilation	up to 4000 m³
Humidity range	30 – 100 %

Additional modifications
Modification code	Description
STAINLESS STEEL.TANK	Stainless steel tank as part of the installation A 50L stainless steel tank as part of the installation housing (the volume may vary depending on the dimensions of the housing, layout, customer requirements), equipped with pressure relief fittings, liquid supply, drain, overflow. Filler neck with filter assembly. The top cover is removable – allows easy cleaning of the inner surface of the tank.
B1	Pressure relief valve Pressure relief valve for pumping the system at the first start and after maintenance, relief of residual pressure. Installed instead of a pressure relief plug
FVD	High pressure filter Mechanical high-pressure filter of 5 µm as part of the installation. Not required.
2K	Valves for manual And automatic control of the pneumatic pump Solenoid valve (220V/12V/24V) for automatic control and manual pump control valve installed in parallel. Provide manual redundancy of the pump pneumatic drive control.
T	Pump start/stop timer The pump start/stop timer provides automatic start/stop of the pump in time without additional control systems
HOLD	Hydraulic power management module for injectors The hydraulic power management module of the injectors includes a high-pressure valve with a pneumatic actuator, a solenoid valve for controlling the valve. The block does not include an automated control system (see the AUTH option). The module can also include an additional pressure converter/pressure indicator/ digital or mechanical pressure gauge to monitor the current state. The module allows you to get a tougher performance and, accordingly, a better fog at the beginning and end of the feed cycle.
ZI	Pump sound insulation Casing of the housing with sound-proof material to reduce the noise level of the pneumatic pump drive.
pc	Safety valve as part of the installation In most cases, a safety valve is not required as part of the installation. The pump in the installation is physically unable to exceed the maximum discharge pressure and thereby cause damage to equipment and personnel.
AUTH	Integrated automation system The system of complex automation is developed individually according to the requirements of the customer. Depending on the complexity of the task, we reserve the right to provide the service on a paid basis.
COMPR	Feeding compressor Feeding air compressor 8 – 10 bar as part of a comprehensive equipment order. As a rule, the compressor is not mounted in the installation housing and is located separately. Installation of the compressor in the housing can lead to a significant increase in the cost of the system.
CLEAN	Water treatment system as part of the installation Integrated water treatment system in accordance with the customer's technical specifications.