Pumps and boosters for fire extinguishing agents handling

General Information

Pump-compressors HII in standard and special versions are used for the transfer of 13B1 freons; 114B2; 125HP; 218; 227ea; 318C, FE36 and others.

Multiphase pump-compressors HII are designed to transfer refrigerones in any phase from 100% gas to 100% liquid.

The line of multiphase pump compressors is represented by 5 basic models for solving standard problems related to pumping unstable multiphase media, but can be supplemented by a line of hydraulic pumps and booster compressors depending on the task.

Some models of pump compressors are designed to swing the chladones to a deep vacuum of 500 mm Hg, which allows you to swing the gas phase of chladone to zero.

Compressor pumps HII can be used to pump out-of-circulation chladones, special chladones, problem gases such as carbon dioxide, hazardous, chemically active media and other gases used in gas fire extinguishing.

For water fire fighting, we can offer a separate line of water jockey pumps to make up the fire fighting system.

Ideas for Using Chladone Pump Compressors

Filling of small cylinders from a special container or ISO tank.

Swing the gas phase of the chladone from an empty container (special container or container) to full.

Swing the serviced fire extinguishing module into an intermediate chladone storage container.

Transport of the liquid phase of Freon from one vessel to another.

Economic Feasibility of Using Chladone Compressors for Gas Phase Rocking

The economic feasibility of swinging the liquid phase of chladone is obvious.

The cost of some grades of chladones is so high that leaving the liquid phase of chladone at the bottom of the barrel is comparable to an economic crime.

The weight of the gas phase is less visible and is often neglected.

In fact, with a gas phase, at least 30 kg of chladone is lost from one cubic tank.

Our specialists calculate the cost-effectiveness of rocking taking into account equipment wear, costs for repair kits, etc.

Calculations show payback of 10 to 100 times for almost all freons at high residual pressure (start of swing) and 2 to 10 times under high vacuum.

Equipment often pays off from the first 10 barrels.

Send a request and our experts will offer you the best solution to save your money.

Specifications

• Drive type: pneumatic;
• Pressure range: 0 to 86 atm standard, 2000 atm maximum (0-8.6/200 MPa);
• Hydraulic part type: single/double piston;
• Number of stages: single-stage/two-stage;
• Phase state of the medium at the inlet: from 100% liquid phase to 100% gas phase;
• Injection phase state of the medium: from 100% liquid phase to 100% gas phase;
• Hydraulic (gas) part lubrication: dry, oil-free - works without lubrication, does not contaminate chladone;
• Air drive grease: grease;
• Type of rod seal: double, with unloading chamber;
• Pressure range: 5 to 86 atm standard, 2000 atm maximum (1 - 8.6/200 MPa);
• Minimum inlet pressure: vacuum 500 mm Hg;
• Maximum inlet pressure is determined by the model equal to maximum discharge pressure;
• Liquid phase capacity: 0-20l/min (100 l/min maximum);
• Maximum Gas Phase Capacity: depends on operating mode;
• Pneumatic drive power supply: 5-10 atm (0.5-1.0 MPa);
• Pressure control: smooth, stepless, medium/high precision, in a wide range of operating pressures;
• Flow control: smooth, stepless, medium/low precision, over a wide range of flow rates.

Benefits

• Clean gas design - no lubrication;
• Do not contaminate gas - ideal for pumping high-purity gases;
• Unlimited number of start-up, shutdown cycles - designed for hard cycle load operation;
• Smooth, easy adjustment of supply and delivery pressure in a wide range from 0 to MAX;
• Do not require any electrics - fire and explosion-proof;
• Compact and lightweight - mobile solution;
• Transfer from 100% gas phase to 100% liquid phase;
• No cavitation restrictions by definition;
• Possibility of gas liquefaction by pressure;
• Ability to swing gas to significant vacuum values.
• Inert to dust, moisture, weather;
• Fire - Explosion Proof
• Easy to operate, maintain, manage, repair.